HOME > PRODUCTS > SIGNAL PROCESSORS
VFX-2DDR VFX-299 VH-6 HVQ-231 HVQ-131 HVQ-215
VQ-15N VQ-231N VQ-31N VC-23 VC-34
   VC-34
 
 
  Front View / Rear View
  Manual / Dimensions

The VC-23 offers a stereo 2-way or mono 3-way active crossover format, while the VC-34 gives you the choice of a stereo 3-way or a mono 4 or 5 way active crossover. The both has balanced XLR inputs and outputs as well as unbalanced 1/4¡± connectors. And 24dB/octave slopes with minium phase shift.
It features a separate subwoofer output section in either mode for incresed flexibility, Crossover frequencies
can be from 60 Hz to 13 kHz, The logically laid out front panel makes setup a snap.The VC-23,VC-34 is an absolute best buy in a crossover.

 
SPECIFICATIONS
Model VVC-23 / VC-34
INPUT  
Connectors 1/4" TRS, female XLR (pin 2 hot)
Type Electronically balanced/unbalanced, RF filtered
Impedance Balanced 10 k ohm, unbalanced 5 k ohm
Maximum Input Level £¾+20dBu balanced or unbalanced
CMRR  
OUTPUTS  
Connectors 1/4" TRS, male XLR (pin 2 hot)
Type Impedance-balanaced/unbalanced, RF filtered
Impedance Balanced 100 ohm, unbalanced 50 ohm
Max Output Level £¾+21dBu balanced/unbalanced into 2k Ohm or greater
SYSTEM SPECIFICATION  
Bandwidth 20Hz to 20kHz, +/-0.5dB
Frequency Response £¼8 Hz to £¾50kHz, +0/-3dB
Signal-to-Noise Ref: +4 dBu, 22 kHz measurement bandwidth
Stereo Mode £¾94dB (Low Output)
£¾93dB (Mid Output VC-34)
     £¾92dB (High Output)
Mono Mode £¾94dB (Low Output)
£¾93dB (Mid output VC-23)/93dB(High Mid output & Low Mid output VC-34)
£¾92dB (High Output)
Dynamic Range £¾114 dB, unweighted, any output
THD + Noise £¼0.03% at +4 dBu, 1 kHz
£¼0.05% at +20 dBu, 1 kHz
Interchannel Crosstalk £¼-80dB, 20Hz to 20kHz
CROSSOVER FREQUENCIES  
Sub Woofer 80 to 250Hz
Low 60 to 1.3KHz or 600Hz to 13kHz (x10 setting)
Low/Mid(VC-34) 60 to 1.3KHz or 600Hz to 13kHz (x10 setting)
Mid/High 60 to 1.3KHz or 600Hz to 13kHz (x10 setting)
Filter type Linkwitz-Riley, 24 dB/octave, state-variable
FUNCTION SWITCHES  
Mute Activates signal mute on Low,High,Mid(VC-34)
Subwoofer per channel
Front Panel (Low Cut) Activates 15 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel
x1 / x10 Range Selector Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel
Rear Panel  
Mode Selects stereo 2-way or mono 3-way of VC-23/ Stereo 3-way or mono 4-5-way of VC-34 operation and disables all LEDs for controls that are non-functional in the selected mode
Ground Lift Disconnects from AC ground
INDICATORS  
Stereo Operation LED OFF
Mono Operation Yellow LED Turn on
Peak Red LED per channel
x10 Green LED per channel
POWER SUPPLY  
Operating Voltage 100VAC 50/60Hz, 120VAC 60Hz
230 VAC 50/60Hz
Power consumption 15W
Main Connection IEC receptacle
PHYSICAL  
Dimensions: W x H x D 483 x 44x176 mm
Shipping/CBM 0.0255
Net Weight 2.5 kg
Shipping Weight 3.9 kg
*Note: Specifications subject to change without notice
Copyright © 2007. stkpro.com All right reserved.
E-mail : stkcom@stkpro.com