VFX-2DDR VFX-299 VH-6 HVQ-231 HVQ-131 HVQ-215
VQ-15N VQ-231N VQ-31N VC-23 VC-34
  Front View / Rear View
  Manual / Dimensions

The HVQ215 is a 2/3 octave, dual 15 band graphic equalizer in a 2 rack space package.
The long throw, high resolution faders allow precise adjustment of each constant Q band.
The HVQ215 has an on board limiter with variable threshold control.
Logical LED meters are present for level and gain reducation for each channel.

  • New Green design with 1:1 output linear type level control system.
  • 21 dBu capacity for input and output level circuits
  • The unit is dual range +/-15dB or +/-6dB boost and cuts..
  • Inputs/Outputs are balanced XLR and unbalanced 1/4” phone jack.
  • A switchable 18dB/octave low cut filter is preset to 40Hz.
  • Ultra low noise 100dB, 0.001% THD
  • 5:1 Ratio Comp contol range
Model HVQ-215
Connectors 1/4" TRS, female XLR (pin 2 hot)
Type Electronically balanced/unbalanced, RF filtered
Impedance Balanced 40k ohm, unbalanced 20k ohm
Maximum Input Level >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Connectors 1/4" TRS, male XLR (pin 2 hot)
Type Impedance-balanaced/unbalanced, RF filtered
Impedance Balanced 120 ohm, unbalanced 60 ohm
Max Output Level >+21dBu balanced/unbalanced into 2k Ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 2/3 Oct 15 Band (20Hz~20kHz +/-0.5dB)
Frequency Response <10Hz to >50kHz, +0.5/-3dB
Signal-to-Noise >94dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range >112dB, unweighted
THD + Noise <0.04%, 0.02% typical at +4dBu, 1kHZ
Interchannel Crosstalk <-80dB, 20Hz to 20kHz
Limiter Thershold Control Min 0 dB through max 24dB range(off position)
Comp threshold level +5db to +11dB
Comp ratio fixed, 5 : 1
EQ Bypass Bypasses the graphic equalizer section in the signal path
Low Cut(recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
Range(recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
Output Level Meter 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10,
Gain Reduction Meter 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
EQ Bypass Red LED
Clip Red LED
Low Cut Active Red LED
+/-6dB range Yellow LED
+/-15dB range Red LED
Operating Voltage 100VAC 50/60Hz, 120VAC 60Hz
230 VAC 50/60Hz
Power consumption 12W
Main Connection IEC receptacle
Dimensions: W x H x D 483 x 88x197
Shipping/CBM 0.0286
Net Weight 3.94 kg
Shipping Weight 5.46 kg
*Note: Specifications subject to change without notice
Copyright © 2007. stkpro.com All right reserved.
3F, 15, Majang-ro 543beon-gil, Gyeyang-gu, Incheon, Republic of Korea (Zip 21104)
Tel. 82-32-525-1788~1789 Fax. 82-32-525-1784   E-mail : stkcom@stkpro.com