|
|
| |
| |
|
|
|
|
The VRM-11T DRV Mix amplifier are designed multi purpose outputs, use to contractor and install sysytems with 3 CH
independent power outputs, also perfect for professional sound reinforcement systems. The VRM-11TDRV offers dual
purpose output sysems, 3 X 300W power output for zoned speaker applications, and one 600W bridge outputs + 300W
outputs for main and monitor systems.
- Rack mount version steel case 4-2/3U space
- 11 CH 23 input configurations.
- Triple power with 3 metering total 900W 0,05%THD
- 8 Mixer output configurations
- 3 X 7band master graphic equalizers
- ultra low noise circuit board design
- Realistic sound DSP with variable time control reverb, delay effect processor,
also variable type karaoke echo sound control
- Lowest in-rush troidal transformers and T-tunnel design heatsink cooling
- FET control power on/off muting circuit.
|
|
| |
| SPECIFICATIONS |
 |
|
|
| Model |
VRM11T-DRV |
| Configuration |
|
| Power(EIA) |
|
| 4 ohm load per channel |
330W x 3 |
| 8 ohm load per channel |
220W x 3 |
| Rated Power(20-20kHz) |
|
| 4 ohm load |
300W x 3 |
| 8 ohm load |
200W x 3 |
Distortion
(THD & SMPTE IND; 20Hz to 10kHz) |
|
| Mic input to main mixes output |
0.01% |
| Mic input to power amp output |
0.05% |
Inputs
(all 1/4” TRS are Bal./Unbal.except*) |
|
| Mono mic/line |
7 + 2 XLR Jack |
| Stereo line |
4 1/4" TRS Phone Jack |
| Tape In |
Stereo RCA Jack |
| AUX Returns |
TS 1/4” Phone Jack |
Outputs
(all 1/4” TRS are Bal./Unbal.except*) |
|
| Speaker Outputs |
TS 1/4” |
| Main Mix(line)Level |
TS 1/4” |
| Main Mono(Subwoofer) |
TS 1/4” |
| Aux Sends |
TRS 1/4”, 1 EFX, 1 Mon |
| Tape L/R Stereo |
Stereo RCA |
| Controls Channel |
|
| AUX Send Control |
1 EFX, 1 Mon |
| Constant Pan Control |
Yes |
| 10dB Input PAD |
Yes |
| Controls Master |
|
| Digi EFX |
Dual Variable
1 REV Control(0.5~10 sec)
1 DELAY Control(50~1000 msec)
1 FEEDBACK Control(0-90%)
1 Delay and Reverb MIXING Control(0~100%)
|
| Digi EFX Control |
On/Off, LED Level Set |
| Digi EFX Buss Control |
1 + 1 Monitor |
| Aux In Control |
1 + 1 to Monitor |
| 7-Band Graphic Equalizer |
1L + 1R + 1Monitor |
| Aux Send Master |
Yes(1Monitor) |
| Power AMP Assign |
L + R(Bridge)/Stereo |
| Foot Pedal EFX Jack |
Yes |
| Noise |
|
| Equivalent input noise |
-110 dB |
| Residual output noise(SP OUT) |
-70 dB |
| Residual output noise(MAIN OUT) |
-97 dB |
| Crosstalk |
|
| Adjacent inputs or input to output |
-60 dB |
| Frequency Response |
|
| 20Hz to 40kHz(Mic Pre Section) |
+0, -1.5dB |
| 20Hz to 30kHz(Power Amp Section) |
+0, -1dB |
| Maximum Levels |
|
| Mic Preamp Input |
+10 dBu |
| All Other Inputs |
+18 dBu |
| All Mixer Outputs |
+18 dBu |
| Impedances |
|
| Mic Preamp Input |
4k Bal. |
| All Other input |
＞10k |
| Line Input |
4k |
| CH Equalization |
3Band |
| Low EQ |
100 Hz +/-15dB |
| Mid EQ |
2.5 kHz +/-12dB |
| Hi EQ |
10 kHz +/-15dB |
| Power Requirements |
1350Watts |
| Dimension(WxHxD) |
440 x 200 x 250 |
| Shipping/CBM |
0.0676 |
| Net Weight |
17.50kg |
| Shipping Weight |
19.24g |
|
| *Note: Specifications subject to change without notice |
|
|
