DI-2000A DI-1000P Proaudio Cables Blank Pannel Speaker Stand Speaker Pole
STK Eyebolt Casters STK Briefcase Rack Mount Ears Speaker Brackets  
  Front View / Rear View
  Manual / Dimensions

The DI-2000A is will give you clean and crisp sound after connect to the any effect devices, music instruments so that their effect will be heard over the Guitar amps with P.A system or on the Recording.DI-2000A is active,DI-1000P is Passive type working. Designed light and solid aluminium case with safety protect control panel.

  • INPUT JACK - Connecting signal source to this jack switches "ON" the battery power.
  • LED - When input jack is plugged in and with good batteries, illuminates this power "ON" LED. Also LED stays whenever pantom power present.
  • THRU - Parallels input jack.
  • INPUT SELECT SWITCH - Optimizes input signal to DI BOX circuitry. PKUP for instruments with passive pickups.
    LINE for most keys, line levels and active pickups. SPKR for bridging speaker outputs from amps
  • GND LIFT - Makes or breaks input ground to pin 1 of output XLR. Can be used with either battery or phantom power.
  • XLR OUTPUT - (on opposite end) Provides mic level balanced output to mixer. Pin 2 is in phase with the input jacks tip.
Model DI-2000A
INPUT Pickup Line Speaker
Maximum input level +8dBm +5dBm +35dBm
Input Impedance 10MΩ 10MΩ 11MΩ
Gain Structure -8dBm -28dBm -48dBm
Residual Noise -106dBm -109dBm -109dBm
Working S/N(15dB Harm) -99dBm -109dBm -89dBm
Frequency Response +0.005dB 100 to 20 kHz
+0.80dB 20 to 20 kHz
Rise time 1㎲, no overshoot
THD + Noise 0.01%
Output Impedance 200 ohms
Power Required 48V Phantom or two 9V bat.
Battery Life 300 hrs
current Draw <7mA DC
Shipping/CBM 0.227/1 Carton(24pcs)
Net weight 0.58 kg/each
Shipping weight 14kg/1 carton
*Specifications subject to change without notice.
Copyright © 2007. stkpro.com All right reserved.
E-mail : stkcom@stkpro.com