| Model |
SP-1563AP |
| ENCLOSURE SPECIFICATION |
|
| System configuration |
3-Way full-range/Bi-amp powered system |
| LF system & Loading |
One SK15500 15" woofer, vented |
| MF system & Loading |
One SK8208F 8" woofer on constant direct-loaded horn. |
| HF System & Loading |
One 3" voice coil compression driver on SABS 9 rotated horn |
| Operating Mode |
Active powered |
| Enclosure Material |
Plywood, MDF. |
| Enclosure Finish |
Black warnex texture coated |
| Frequency Response |
|
| ±3 dB |
53Hz ~ 18.5kHz |
| -10 dB |
40Hz ~ 20kHz |
| Axial Sensitivity(dB SPL, 1 watt @ 1m) |
101 |
| Recommended high pass frequency |
30 Hz |
| Impedance(ohms) |
8 ohms |
| Power Handling(Watts, Continuius) |
800 |
| Power Handling(Watts, Peak) |
2000 |
| Calculated SPL Limit(Referenced to 1 m) |
|
| Peak |
134dB |
| Long Term |
128dB |
| Norminal Dispersion(degree@-6dB) |
|
| Horizontal |
90 ° |
| Vertical |
40 ° |
| Protection |
Poly switch current protection |
| Optional Accessries |
STK Caster "SCP80"(80mm wheel), "SCP 100"(100mm wheel)
STK Eye bolt "SEB 08" |
Demensions
( ±0.13 inch / ±3 mm) |
Height 1130 |
| Front width 475 |
| Rear width 330.2 |
| Depth 480 |
| Shipping/CBM |
0.3012 |
| Net weight |
61.8 kg |
| Shipping weight |
68.0 kg |
| AMPLIFIER SPECIFICATION |
|
| Max output Power |
|
| EIA @1KHz 1% THD |
|
| LF output |
600W |
| MF/HF output |
250W |
| Max output Power |
|
| FTC @THD+N=0.1% |
|
| LF output |
550W |
| MF/HF output |
220W |
| Frequency Response |
20Hz ~ 30kHz |
| THD +N |
|
| LF ; (Ref. 45Hz ~ 5kHz) |
≤0.05% |
| MF/HF ; (Ref. 1KHz ~ 20kHz) |
≤0.05% |
| IMD(SMPTE 4 : 1, half power) |
|
| LF @ 8 ohm |
≤0.05% |
| MF/HF @ 8ohm |
≤0.05% |
| S/N Ratio (Filter: A-waiting.RMS) |
LF ≥ 93dB , MF/HF ≥ 90dB |
| Damping Factor |
LF ≥350 , MF/HF ≥250 |
| Input Sensitivity (Att max) |
+4dBu (1.228V) |
| Cross over frequency(LPF SW 12dB range) |
730Hz @-3dB |
| Cross over frequency(LPF SW 24dB range) |
570Hz @-6dB |
| Input impedance |
10k ohm(unbalance), 20k ohm (balance) |
| Controls |
LPF select, Amp gain knob, AC switch |
| Connectors Input/Through |
XLR Female jack/XLR Male jack |
| Indicators |
Power(green), Sig(green), LF clip(red), HF peak(Red) |
| Protection |
1)short circuit, 2)current limiter, 3) DC detection,
4)Thermal cut off, 5) VDC cut off fuse. |
| Fan operating |
Variable speed control circuit. |
| Power Requirements(1/3 power) |
450 Watts |
.jpg)
