HOME > PRODUCTS > Powered Mixer Speaker Systems
PSM-6150AP PSM-6150APM        
   PSM-6150APM


 
  Front View / Rear View
  Manual / Dimensions

Dual 6.5" + "NEO" HF driver type high powered full range system, the PSM-6150APM is can be readily intergrated into slave units of PSM-6150AP to increased more powere outputs (2 X 200W). Balanced XLR main inputs and balanced XLR main outputs on the master main section, switchable mute system high output headphone jacks, output level metering for main and speaker outputs. also have 5 band equlaizers(optional order).The power module is designed by analog troidal type not digital that especially for powerful low frequency voice speech with real 200W RMS output. The compact,scratch proof enclosures are rugged for outdoor use. Built-in high power 2 X 6.5" Woofer with neodymium HF Driver for 2 way full range sound systems.The enclosure are suited to use on a speaker pole stand, table for up-close, or stage monitor. Can also be used main PA systems with PSM-6150AP by simply add 1 of STK SPK-615AP active subwoofer speaker system.

 
SPECIFICATIONS
Model PSM-6150APM
ENCLOSURE SPECIFICATION  
System configuration Powered, 2-way full range
LF system & Loading Dual SK 6580 6.5" Vented
HF system & Loading One 1" Neodymium compression driver(SK20L)
Operating Mode Active
Frequency Response  
+/- 3 dB 85Hz ~ 18kHz
-10 dB 75Hz ~ 19kHz
Axial Sensitivity 100
(dB SPL, 1 Watt @ 1m)  
Norminal Input Impedance(ohms) 4-8
Power Handling
(Watts,Continuius)
200
Power Handling
(Watts,Peak)
800
Calculated SPL Limit(Referenced to 1 m)  
Peak 129 dB
Long term 123 dB
Nominal Dispersion(Horizontal/Vertical) 100 degree Concial
Optional accessories STK Pole "SPM35130", STK Stand "ST6180"
Demensions
( ±0.13 inch / ±3 mm)
Height 269
Front width 460
Rear width 103
Depth 280
Shipping/CBM 0.0519
Net weight 15.5kg
Shipping weight 17.5kg
MASTER MAIN & POWER MODULE SECTION SPECIFICATION
Power(EIA)  
4 ohm Load Single channel 200W
8 ohm Load Single channel 115W
Rated Power(20-30kHz)  
4 ohm Load 185W
8 ohm Load 115W
THD+N; 20Hz to 20kHz)  
XLR Main input to XLR main output 0.05%
XLR Main input to power amp output 0.10%
Inputs  
XLR Main Master Input -10 dBu
Outputs  
Speaker Outputs Internal Connection
XLR Main Master Output Balanced XLR
Head Phone Output TRS 1/4"
Controls Master  
Main Master Volume Control Yes
5-Band Graphic Equalier Yes(optional order)
Bar Graphic Level Metering Yes
Head Phone Mute Control Yes
Noise  
Residual output noise(SP Out) - 80 dB
Residual output noise(Main Out) - 88 dB
Frequency Response  
20Hz to 34KHz(Main Master Section) +0,-1.5dB
20Hz to 25kHz(Power Amp Section) +0, -1dB
Maximum Levels  
XLR Main Master Input +10 dBu
XLR Main Master Output +5 dBu
Head Phone Ouput 2.8V
Impedances  
Bal XLR Main Mix Input 3.6 K Oh
Graphic Equalization 5 Band
63Hz,250Hz,1KHz,3.5KHz,12KHz +/-12dB (OPTION)
Power Consumption  
AC 120V/60Hz 3.2A
AC 230 50/60Hz 1.9A
Special Features 1. Convection cooling
2. Full Circuit Protection
 
*Specifications subject to change without notice.
Copyright © 2007. stkpro.com All right reserved.
E-mail : stkcom@stkpro.com